Selection of Installation Tools and Accessories
Standard floor installation wedges are small plastic wedges that are used during the installation of floors, such as hardwood, laminate, or click LVT, to maintain a consistent perimeter expansion gap which is essential for allowing the floor to expand and contract with changes in temperature and hum..
£6.60
Bona Heavy Duty Roller Frame, plus Microfibre and Polyester RollersHeavy Duty roller frame suitable for 250mm rollersMicrofiber Roller - 5mm pile height - for the application of Hardwax OilsPolyester Roller - 11mm pile height - for the application of Waterborne floor lacquers such as the Bona Primer..
from £7.20
EZ Floor Wedges - plastic floor wedges, easy adjustable between 8 - 15mmAvailable in Pack of 10 - equivalent to 20 standard wedgesWedges quickly lock together and adjust to required thickness.Maintain expansion gap when installing Engineered flooring, Solid Hardwood, Laminate and Veneer floorsEZ Pla..
£7.80
B11 – 6mm notched trowel / spreader - use with Wood Flooring Adhesive - gives correct coverage when installing solid hardwood, parquet woodblock or engineered wood floorsB3 – 3mm notched trowel / spreader - use when installing Parquet Mosaic Panels, or to give additional strength when nailing / scre..
£8.50
Adhesive spreader for pressure sensitive, Acrylic, High Temperature or Epoxy AdhesivesApprox. notch sizes:A1 = 1.5mm wide x 1.1mm deep notchA2 = 1.7mm wide x 1.4mm deep notchB1 = 2.0mm wide x 2.4mm deep notchAdhesive Spreader Trowel width Approx. 180mm..
£8.50
Flooring Rachet clamp for use with traditional tongue & groove solid and engineered hardwood flooringEnsures a tight joint between planks..
£10.00
Kahrs 5S locking tool to lock the short side joints of Kahrs hardwood flooring with Woodloc joint systemCan also be used to unlock the joints..
£10.00
General purpose knocking block for use with all Engineered floors, Solid Hardwood Flooring, Laminate and VeneerShort Knocking Block 175mm longLong knocking Block 500mm long..
from £11.40
Tongue Tite Screws - the only screw for laying solid hardwood tongue & groove flooringWith the Tri-Lock threadform the screw will drive straight through the boards & into the substrate without pre-drillingQuick & easy to install and remove with the benefit of a secure fixInsert screw at ..
£11.40
Installation kit - ideal for laminate or engineered wood flooringContains:- small jemmy bar, knocking block and 20 wedges(colour may vary)..
£11.50
Suitable for adhesive and sealant cartridges upto 310mlDesigned for high viscosity materials such as Rewmar Flexyfix adhesiveFlow stop control and steal catch and release plateHeavy Duty Sealant Gun..
£14.00
Professional Heavy Duty Roughneck Knocking BlockTough Polypropylene with handleSuitable for installation of Engineered Hardwood Floors, Solid Hardwoods and Laminate FlooringRoughneck HD Knocking Block 480mm long..
£17.50
Professional heavy duty pull bar for installation of Engineered Floors, Solid Hardwoods and Laminate FlooringStrong welded head and powder coated finish for heavy duty useBevelled end tip for prying boards togetherSoft felt base to protect surface of woodPolypropylene cap on striking face to absorb ..
£23.50
Osmo Mini roller and brush set for the application of Osmo finishes.Contains:-Tray with grid3no. tray insertsOsmo microfibre roller 100mmRoller frameOsmo natural bristle brush 60mmAdditional Microfibre rollers available separately..
£25.00
Osmo Floor Roller Kit - designed for the application of Osmo clear hardwax oils100% seamless microfibre roller - solvent resistantOptimal yield due to unique structure of the microfibresContains:- Tray with grid3 tray insertsOsmo microfibre roller - 250mm wideRoller frameAdditional Microfibre r..
£35.00
Kahrs Professional Jemmy bar for use with all Engineered hardwood floors, Solid hardwood, Laminate and Veneer floorsHeavy duty useNote: colour may vary..
£36.00
Showing 1 to 16 of 16 (1 Pages)